My SCUBA Gear

ScubaPro MK25/S600 regulators

:

MK25 First Stage

• Machined marine grade chrome plated brass body
• Patented over-balanced composite/stainless steel piston
• TIS (Thermal Insulating System) on piston and spring
• Externally adjustable intermediate pressure (patent pending)
• New conical single stainless steel wire filter
• Enlarged water balancing chamber holes
• 5 High flow low pressure swivel ports
• Dual high pressure ports
• Available in yoke or DIN (not shown) configurations

S600 Second Stage

• Technopolymer body and components
• Peak performance air balancing system
• Air-balanced linear-flow valve
• Automatic anti-set feature
• Diver-adjustable VIVA
• High-flow exhaust valve
• Diver-adjustable inhalation effort control
• Lightweight, compact size
• Ergonomic, safegrip mouthpiece

• Single hose configuration
• Classic downstream valve
• Air-balanced power inflator valve
• Self-flushing mechanism
• One hand operation

ZEAGLE Escape BCD

The Escape is a full featured but light weight BC with an elastic cummerbund assembly, a Ripcord weight system, and rear mount weight pockets. The Escape is also available with a pull out weight system if that is your preference.

The Escape is ideal for the diver who wants a lightweight system for both travel and local diving. It is designed to pack easily into a lightweight travel system without compromising on features.

Utility pockets and a built in lumbar pad add convenience and comfort to this superb new system.

• 35-lb lift capacity low profile bladder
• PFS Sizing
• Reinforced 430 denier para-pac nylon construction
• Two flap utility pockets
• Adjustable elastic waist panels
• 4 Delrin D-rings
• Adjustable Sternum Strap
• 30-lb capacity Ripcord weight system (pull-out system also available)
• 20-lb Capacity rear mount weight system
• 5 Trim Colors available on shoulders

Suunto Vytec Computer

SUUNTO VYTEC – MULTIGAS DECOMPRESSION COMPUTER WITH OPTIONAL WIRELESS TRANSMISSION

The Suunto Vytec is a versatile full decompression computer for the advanced diver. Its three operating modes, ability to set multiple gasses and its optional wireless pressure transmission probably makes it the most feature-rich dive computer on the market.

The Vytec provides a wide range of operating modes and settings that can be set to suit every diver's needs with an easy-to-operate user interface. Operating mode specific displays, reliable push-buttons and a clear display add to user friendliness.

VERSATILE DECOMPRESSION COMPUTER

The Suunto Vytec has three operating modes: Air, Nitrox and Gauge. The Air mode is for using standard air only, the Nitrox mode for use with up to three nitrox mixes containing 20-99% oxygen and the Gauge mode for use as simple bottomtimer. The Suunto Vytec uses an adjustable Suunto RGBM model for decompression calculations.

MULTIPLE GASES

The Suunto Vytec enables the technically oriented diver to switch gases during the dive. When in Nitrox mode the user can preset up to three different gas-mixes containing 21-99% oxygen. Preferred gas mixes can be stored as default (e.g. EAN32, EAN50, EAN99), and be set ON or OFF for each dive, or modified as needed. The Suunto Vytec provides easy and reliable gas switching between enabled gases during the dive. Gas switching is allowed only for gases that lie within chosen maximum PO2 limits. CNS and OTU values are displayed using a Oxygen Limit Fraction (OLF) bar graph.

OPTIONAL WIRELESS PRESSURE TRANSMISSION

The Suunto Vytec is available with an optional wireless pressure transmitter that can easily be attached to the high-pressure port. The wireless operation can easily be enabled or disabled in the Vytec's settings. With the wireless transmission enabled the Vytec displays tank pressure and calculates remaining air time based on current gas consumption. The wireless transmission can be used in Air, Nitrox and Gauge modes. The pressure transmitter is 300bar (4000psi) compatible, and has user replaceable battery.

ACCURATE GAUGE MODE WITH STOPWATCH

In Gauge mode the Vytec works as a bottom timer also providing accurate profile sampling and bookmarking functions. A dive timer with reset function also displays the dive time in minutes and seconds, a feature extremely useful for timing accurate bottom times and decompression stops.

MAIN FEATURES

- Air, Nitrox and Gauge modes
- Gas switching (3 mixes 21-99%)
- Optional wireless pressure transmission
- Extensive memory functions
- Built in dive simulator
- Easy and reliable push-buttons
- User replaceable battery
- PC interface compatible
- Adjustable Suunto RGBM model